| Application for Approval |
ECE 90
|
SA Compulsory |
| 1 |
Application for approval shall be submitted by
manufacturer or duly accredited representative |
Required |
Not Required |
| 2 |
Application for approval may be submitted by the holder
of type approval to Reg. 13 or 78 in respect of replacement brake lining assemblies |
Required |
Not Required |
| 3 |
Application to include description of brake lining
assembly, diagrams showing dimensions & position on the vehicle |
Required |
Not Required |
| 4 |
Sufficient quantities of brake lining assemblies for
the tests to be provided |
Required |
Not Required |
| 5 |
Applicant to provide vehicle/brakes for the tests |
Required |
Not Required |
| 6 |
Competent authority to verify satisfactory arrangements
for control of conformity of production before approval is granted |
Required |
Not Required |
| 7 |
Applicant to provide friction behavior in accordance
with the conformity of production requirements |
Required |
Not Required |
| Approval |
ECE 90
|
SA Compulsory |
| 1 |
If brake lining assemblies comply with the
Specifications and tests approval shall be granted |
Required |
Not Required |
| 2 |
Approval number shall be given to brake lining
assemblies approved |
Required |
Not Required |
| 3 |
The same Contracting party shall not assign the same
number to another brake lining assembly type. |
Required |
Not Required |
| 4 |
Notice of approval or of extension or refusal of
approval or withdrawal of approval or production definitely discontinued shall be
communicated to the parties to the 1958 Agreement with this Regulation |
Required |
Not Required |
| 5 |
There shall be affixed to every brake lining assembly
of a type approved under this Regulation an international approval mark. This mark to be
legible and indelible. |
Required |
Not Required |
Click to print this article
